“Showing teeth” when pumping low- to high-viscosity fluids: Gear pumps are very flexible when it comes to the uniform supply of media. They are especially preferred in hydraulics, for they work without pulsation and are low-maintenance. In addition to hydraulic motors, typical areas of application include the handling of solvents, molten plastics, and rubber, but they are also well-suited for dosing.
Delivery characteristics of the Gear Pumps
of our alliance members
- Capacity: up to 170 m³/hr
- Pressure: up to 320 bar
- Speed: up to 4000 RPM
- Viscosity: up to 40 Million mPas
- Temperature: -100 °C up to +550 °C (-148 °F up to +1020 °F)
Operating principle of the gear pump
In addition to the housing with inlet and outlet, the gear pump consists of two gears, one of which is driven. Here, a conveying chamber is created between two gears. In it, the gear teeth, which interlock with one another, move the conveying fluid to the housing wall along the suction and pressure side. If two gear teeth meet, the play between the teeth is very tight – so the conveying fluid is pressed out of the gear gap. Gear pumps are therefore displacement pumps.
Internal gear pumps are a special case: Here the medium is conveyed by just one gear, which runs eccentrically in the internal interlocking of a gear ring.
Areas of application for gear pumps
Gear pumps are used frequently in hydraulics. For even if there is pressure, the hydraulic gear pump generates a practically continuous volume flow. Resistance from output, throttle points or switch elements do not affect the operation. Pumps for hydraulic motors are operated with hydraulic fluid. They come in numerous sizes for all conceivable uses.
Industrial pumps are typically used to convey chemicals, and in the manufacturing and processing of plastics, as extrusion pumps and polymer pumps, and also as booster pumps. They are also used in the food industry. Here, they can handle low and high-viscosity media, which is an advantage in applications where the viscosity of various conveyed fluids is quite varied. The viscosity may be between 0.2 mPa and 40 million mPa for conveyance.
The individual media that can be conveyed with gear pumps include, among others:
- Chemical industry: Alcohols, additives, bitumen, tars, wax, acids and bases, esters, glycerin, resins, isocyanate, adhesives, monomers, oils, and phenols
- Polymer manufacturing and processing: PET, PBT, PS, ABS, PVC, PE, PEEK, cellulose, nylon, and other polymers
- Food processing: Plant oils, butter and margarine, flavorings, chocolate, licorice, chewing gum mass, syrup, honey, gelatins, mustard and ketchup, sugar solutions
- Pharmacy: Amino acids, lotion, shampoo, vitamins
Gear pumps are not suitable for handling media with solid content since it can damage or block the individual gear teeth. To prevent any tooth gap here, operators should use other pump technologies for such applications.
Benefits of gear pumps
Flexibility with regard to the viscosity of the medium is not the only benefit that distinguishes gear pumps. Other benefits include:
- Great dosing precision
- High efficiency
- Low-pulsation conveyance
- Low life cycle costs
- High availability
- Low maintenance effort
- Suitable for lubricating media
Gear pumps come in many different sizes. They thus cover a broad performance spectrum: Pump capacities up to 200 m³/h are possible. Some of them also enables a differential pressure up to 550 bar and system pressure up to 700 bar. Appropriate gear pumps are also available for areas subject to explosion hazards.
When precision is required: Gear pumps as dosing pumps
Due to their volumetric handling principle, gear pumps can determine the quantity of conveyed medium very precisely. That's why gear pumps are also used as dosing pumps. And there are many different sizes available for dosing, so that there are many possible areas of application.
To make the selection of the right system easier for users and enable quick start-up, some suppliers offer complete dosing systems that are based on a gear pump. These systems already have containers, a scale, and a weighing platform. This way, both volumetric and gravimetric dosing are possible.
Gear pumps for every industry and all areas of application
Whether for high viscosities, for dosing or other applications with accuracy in all industries: With their great flexibility and easy maintenance, gear pumps are very popular and therefore used in many industries.
Do gear pumps seem ideal for your application and are you convinced of their benefits? We’ll be glad to check your non-binding inquiry!